DynaSHIELD® WHITE COATING

$211.00

DESCRIPTION

DynaSHIELD® White Coating is a proprietary blend of polymers. This is an oil-based product. DynaSHIELD® White Coating flashes leaving a non-breathing, heat-reducing, monolithic, CRRC listed coating. It forms a water-repellent surface that easily cleans while resisting microorganisms. Performs under standing water better than all other waterbased coatings. A sustainable cool roof coating.

Before ordering any DynaShield products please check Volatile Organic Compound technical data below.

SKU: 7891500 Categories: , ,

Description

DESCRIPTION
DynaSHIELD® White Coating is a proprietary blend of polymers. This is an oil-based product. DynaSHIELD® White Coating flashes leaving a non-breathing, heat-reducing, monolithic, CRRC listed coating. It forms a water-repellent surface that easily cleans while resisting microorganisms. Performs under standing water better than all other waterbased coatings. A sustainable cool roof coating.

RECOMMENDED USES
This product may be applied over most roofing materials such as metal, BUR, Modified Asphalt Membranes, concrete, PVC, TPO, EPDM, and etc.

APPLICATION
Roof Insulation and roof surface to be coated must be clean and dry. If necessary, remove all dirt, grease, loose debris and residue before applying. Do NOT apply over moisture in or on roof deck. DynaSHIELD® White Coating may be applied with a roller, squeegee, brush or sprayer. Apply at the rate of 1-2 gallons per 100 square feet per pass, depending on the warranty level desired. When applying to thermoplastics, concrete or other masonry surfaces, use a recommended primer. Apply evenly at a surface temperature of 35° F or greater.

BENEFITS
Energy Savings
Freeze Resistant
Flexible
Waterproofs
Cleans Easily
Can Be Tinted
Prevents Rust
Nano-processed

TECHNICAL DATA
   TENSILE 1600 psi ASTM D-2370
ELONGATION 600 % ASTM D-2370
EMITTANCE .88 ASTM C-1371
REFLECTANCE .87% ASTM C-1549
COLOR White (can be tinted – special order)
PERMEABILITY Non-breathing ASTM D-1653
SOLIDS Weight 50% +/- 2% ASTM D-1353
SOLIDS Volume 37% +/- 2% ASTM D-2697
WEIGHT 9.1 lbs. per gallon +/- 2%
VISCOSITY 7,000 to 12,000 cps.
ABRASION Passed ASTM D-986
HARDNESS 55 Shore A ASTM D-2240
STORAGE 3 years unopened between 40° F – 100° F
DRY TIME 1 hr. at 75° F and a thickness of 12 wet mil
FULL CURE 24 – 72 hours depending on humidity, air
movement, and temperature
CLEAN-UP Biodegradable citrus cleaning products or
ARC’s Cleaning Solvent for oil-based products
ADHESION Passed ASTM D-3359
PIGMENT Titanium
FIRE RATING Class ‘A’ in Assembly
VOC <548 grams per liter

Avoid breathing fumes and prolonged contact with skin. Do not ingest. Keep containers covered when not in use. When using, provide proper ventilation. Dispose of product and container in accordance with local disposal codes.

CONSULT ARC TECHNICAL DEPARTMENT FOR ANSWERS TO ANY QUESTIONS REGARDING THE USE OF THIS PRODUCT

System warranty available. When sold separately from the system there is no warranty given, expressed or implied, through the values or statements made here, nor are there any assertions that the product purchased has been individually tested to conform to these standards. Testing is performed on a random basis by our in-house and independent third-party labs in order to obtain approval and/or classification. Acceptance, purchase and selection of these products are the sole responsibility of the buyer, buyer’s agent, or the buyer’s customer. ARC assumes no responsibility for coverage, performance, or injuries resulting from use. Liability, if any, is limited to the replacement of the product.

NO OTHER GUARANTY OR WARRANTY OF ANY KIND IS MADE BY ACE ROOF COATINGS, INC. OR ITS SUBSIDIARIES, EXPRESSED OR IMPLIED, STATUTORY, BY OPERATION OF LAW, OR OTHERWISE, INCLUDING COSMETIC APPEARANCE, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Additional information

Weight 52 lbs
Dimensions 12 × 12 × 14 in

Reviews

There are no reviews yet.

Be the first to review “DynaSHIELD® WHITE COATING”

Your email address will not be published. Required fields are marked *