Pigments for Concrete | Dye Over Blender WB®
November 15, 2022
Pigments for Concrete | Blender Natural Dyes®
November 17, 2022

Blender Seal Acryl® WB

BLENDER SEAL ACRYL® WB is a water-based acrylic solution with low-odor properties. It has a white appearance that dries to a glossy, very resistant transparent film. An acrylic copolymer-based solution that perfectly adheres to concrete surfaces and protects against dust, dirt, contaminants, and mild chemicals.
BLENDER SEAL ACRYL® WB is a fast-drying sealant and very effective on interior and exterior surfaces.

General Use: BLENDER SEAL ACRYL® WB is recommended for use where low odor is required. VOC compliance is required in applications where sealing and positive action against liquid penetration are required. It is used in patios, garages, sidewalks, warehouses, train platforms, buildings, highways, food processing, packaging facilities, and concrete-based surfaces. Surfaces treated with BLENDER SEAL ACRYL® WB are compatible with most adhesives and paints after a minimum curing time of 7 days.

  Ask a Question
Categories: ,

– Low odor.
-Excellent sealing properties.
-Meets VOC requirements.
-Protects concrete from contaminants and pollutants present in the workplace.
−Easy to apply.
− Requires no water.


BLENDER SEAL ACRYL® WB is available in 1 qt (1 Lt), 1 gal (3.8 Lt), 5 gal (18.9 Lt), and 55 gallons (208 Lt). Each container is marked with the name of the product and its batch code.


Degrease and clean surfaces of any existing contamination. Before application, moisten the concrete and remove standing water. Apply two even coats of BLENDER SEAL ACRYL® WB. Wait 2-3 hours between each coat. Porous and weathered concrete may require additional coats of paint.

Cleaning: Clean application equipment with water before the seal dries. After the seal has dried, use an aromatic solvent to clean it.


● BLENDER SEAL ACRYL® WB dries simultaneously by evaporating water and volatile organic compounds. The humidity is less than 80%. Failure to follow application guidelines may result in a surface that appears defective.

● Apply in thin, even coats. Increasing air circulation to improve the film’s drying speed and properties and eliminate the organic solvent’s minimal fumes is necessary.

● These products must be removed before applying subsequent epoxy coatings or applying chemical hardeners and other sealants.

● DO NOT FREEZE. Do not store or use in subzero temperatures unless adequately protected. Freezing will damage this product and make it unusable.

● Freshly applied BLENDER SEAL ACRYL® WB sheeting may whiten when exposed to standing water. Remove the water and let it dry. The dried film becomes transparent.

● If sealing is applied to the concrete substrate or if there is increased humidity, discoloration may occur under the acrylic film, which will become visible for a while due to the slow release of water in the concrete.

● Do not dilute or add any product or additional
material to the original formulation of the product.

● The gloss of BLENDER SEAL ACRYL® WB film fades in outdoor applications. Regular applications are recommended to maintain shine and protection. Slightly roughen shiny surfaces before application. Application test to ensure no stains. Application on soft-colored surfaces exposed to direct sunlight may discolor slightly.


Apply with adequate ventilation. Wear gloves and goggles. Remove all food from the area where the product will be applied before beginning the application. Consult Material Safety Data Sheet (MSDS) before use.


BLENDER SEAL ACRYL® WB containers must be hermetically sealed. Store in cool, dry places at temperatures between 7°C and 29°C (45°F and 85°F). Shelf life is one year in the original factory packaging, hermetically sealed, and under proper storage conditions. Do not freeze.


This product, its materials, and its quality are warranted to be free from defects per Blender Group®, S.de C quality control standards. All recommendations, statements, and accompanying technical data are based on evidence it believes to be reliable and correct. Still, the accuracy of such evidence is not guaranteed, and no warranty, express or implied, is made, including any warranty of merchantability, concerning its products. Satisfactory results depend on many factors beyond Blender. Control Group®.

The user must rely on information and testing to determine the product’s merchantability and assumes all risk, loss, damage, expense, and liability arising from its direct or indirect use or the consequences of yielding the product. Blender Group® shall not be liable for any injury, loss, or damage to buyers or any third party caused by direct or indirect use resulting from the use or inability to use the product.

Blender Group® sole responsibility is to replace the part of the product found to be defective. Any warranty claim must be made within six (6) months from the date of the claim. This limited warranty applies only if the product has been correctly installed and used per the instructions and has previously been appropriately stored.


There are no reviews yet.

Be the first to review “Blender Seal Acryl® WB”

Your email address will not be published. Required fields are marked *

No more offers for this product!

General Inquiries

There are no inquiries yet.