DynaSHIELD® QD SEAM SEALER

$237.00

DESCRIPTION

DynaSHIELD® QD Seam Sealer is a proprietary blend of polymers. This is an oil-based product. DynaSHIELD® QD Seam Sealer flashes leaving a non-breathing, heat-reducing monolithic coating. It forms a water-repellent surface that easily cleans while resisting microorganisms.

Before ordering any DynaShield products please check Volatile Organic Compound technical data below.

SKU: 7892200 Categories: , ,

Description

DESCRIPTION
DynaSHIELD® QD Seam Sealer is a proprietary blend of polymers. This is an oil-based product. DynaSHIELD® QD Seam Sealer flashes leaving a non-breathing, heat-reducing monolithic coating. It forms a water-repellent surface that easily cleans while resisting microorganisms.

RECOMMENDED USES
This product may be applied over most roofing materials such as metal seams, BUR, Modified Asphalt Membranes, SinglePlies, butyl tape and polyester.

APPLICATION
Surface to be treated must be clean and dry. If necessary, remove all dirt, grease, loose debris and residue before applying. Do NOT apply over moisture in or on roof deck. DynaSHIELD® QD Seam Sealer may be applied with a brush or extruded. Apply evenly at a surface temperature of 35° F or greater. When applying to thermoplastics, concrete, or other masonry surfaces, use a recommended primer. Warm product to 100 ° F for application.

BENEFITS
Easy To Apply
Cleans Easily
Long Shelf Life
Freeze Resistant
Year Round Usage
Fast Curing
Single Component
Nano-processed

TECHNICAL DATA
TENSILE 1700 psi ASTM D-2370
ELONGATION 500% ASTM D-2370
COLOR White
PERMEABILITY Non-breathing ASTM E-1653
SOLIDS Weight 53% +/- 2% ASTM D-1353
SOLIDS Volume 41% +/- 2% ASTM D-2697
WEIGHT 9 lbs. per gallon +/- 2%
VISCOSITY 80,000 cps @ 100 ° F
ABRASION Passed ASTM D-986
HARDNESS 68 Shore A ASTM D-2240
STORAGE 3 years unopened at 50° F – 80° F
DRY TIME 1 hr. at 75° F and a thickness of 16 wet mils
FULL CURE 12 – 72 hours depending on humidity,
air movement, and temperature
CLEAN-UP Biodegradable citrus cleaning products or
ARC’s Cleaning Solvent for oil-based products
ADHESION Passed ASTM D-3359
PIGMENT Titanium
FIRE RATING Class ‘A’ in Assembly
VOC <508 grams per liter

Avoid breathing fumes and prolonged contact with skin. Do not ingest. Keep containers covered when not in use. When using, provide proper ventilation. Dispose of product and container in accordance with local disposal codes.

CONSULT ARC TECHNICAL DEPARTMENT FOR ANSWERS TO ANY QUESTIONS REGARDING THE USE OF THIS PRODUCT

System warranty available. When sold separately from the system there is no warranty given, expressed or implied, through the values or statements made here, nor are there any assertions that the product purchased has been individually tested to conform to these standards. Testing is performed on a random basis by our in-house and independent third-party labs in order to obtain approval and/or classification. Acceptance, purchase and selection of these products are the sole responsibility of the buyer, buyer’s agent, or the buyer’s customer. ARC assumes no responsibility for coverage, performance, or injuries resulting from use. Liability, if any, is limited to the replacement of the product.

NO OTHER GUARANTY OR WARRANTY OF ANY KIND IS MADE BY ACE ROOF COATINGS, INC. OR ITS SUBSIDIARIES, EXPRESSED OR IMPLIED, STATUTORY, BY OPERATION OF LAW, OR OTHERWISE, INCLUDING COSMETIC APPEARANCE, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Additional information

Weight 52 lbs
Dimensions 12 × 12 × 14 in

Reviews

There are no reviews yet.

Be the first to review “DynaSHIELD® QD SEAM SEALER”

Your email address will not be published. Required fields are marked *