DynaSHIELD® White Coating is a proprietary blend of polymers. This is an oil-based product. DynaSHIELD® White Coating flashes leaving a non-breathing, heat-reducing, monolithic, CRRC listed coating. It forms a water-repellent surface that easily cleans while resisting microorganisms. Performs under standing water better than all other waterbased coatings. A sustainable cool roof coating.
This product may be applied over most roofing materials such as metal, BUR, Modified Asphalt Membranes, concrete, PVC, TPO, EPDM, and etc.
Roof Insulation and roof surface to be coated must be clean and dry. If necessary, remove all dirt, grease, loose debris and residue before applying. Do NOT apply over moisture in or on roof deck. DynaSHIELD® White Coating may be applied with a roller, squeegee, brush or sprayer. Apply at the rate of 1-2 gallons per 100 square feet per pass, depending on the warranty level desired. When applying to thermoplastics, concrete or other masonry surfaces, use a recommended primer. Apply evenly at a surface temperature of 35° F or greater.
Can Be Tinted
||1600 psi ASTM D-2370
||600 % ASTM D-2370
||.88 ASTM C-1371
||.87% ASTM C-1549
||White (can be tinted – special order)
||Non-breathing ASTM D-1653
||Weight 50% +/- 2% ASTM D-1353
||Volume 37% +/- 2% ASTM D-2697
||9.1 lbs. per gallon +/- 2%
||7,000 to 12,000 cps.
||Passed ASTM D-986
||55 Shore A ASTM D-2240
||3 years unopened between 40° F – 100° F
||1 hr. at 75° F and a thickness of 12 wet mil
||24 – 72 hours depending on humidity, air
movement, and temperature
||Biodegradable citrus cleaning products or
ARC’s Cleaning Solvent for oil-based products
||Passed ASTM D-3359
||Class ‘A’ in Assembly
||<548 grams per liter
Avoid breathing fumes and prolonged contact with skin. Do not ingest. Keep containers covered when not in use. When using, provide proper ventilation. Dispose of product and container in accordance with local disposal codes.
CONSULT ARC TECHNICAL DEPARTMENT FOR ANSWERS TO ANY QUESTIONS REGARDING THE USE OF THIS PRODUCT
System warranty available. When sold separately from the system there is no warranty given, expressed or implied, through the values or statements made here, nor are there any assertions that the product purchased has been individually tested to conform to these standards. Testing is performed on a random basis by our in-house and independent third-party labs in order to obtain approval and/or classification. Acceptance, purchase and selection of these products are the sole responsibility of the buyer, buyer’s agent, or the buyer’s customer. ARC assumes no responsibility for coverage, performance, or injuries resulting from use. Liability, if any, is limited to the replacement of the product.
NO OTHER GUARANTY OR WARRANTY OF ANY KIND IS MADE BY ACE ROOF COATINGS, INC. OR ITS SUBSIDIARIES, EXPRESSED OR IMPLIED, STATUTORY, BY OPERATION OF LAW, OR OTHERWISE, INCLUDING COSMETIC APPEARANCE, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Volatile Organic Compound
What Are “VOC’s”?
As more states enact stricter air quality regulations, the term “VOC” is becoming a greater part of our everyday vocabulary. But what exactly is a “VOC”?
VOC is an acronym for Volatile Organic Compound. That’s a mouthful, but what does it mean? VOC’s are carbon based (organic) solvents that evaporate (volatilize) under normal atmospheric conditions and have the ability to photo-react when exposed to sunlight. This reaction creates low-level ozone, a major component of smog.
Smog is associated with causing asthma, bronchitis, and emphysema. Smog poses a health threat to the young, elderly, and those suffering from cardiovascular disease. And as anyone who has flown into some major metropolitan cities (like Los Angeles) can attest, smog is a real problem for everyday citizens. As a result, many states have enacted strict VOC regulations, limiting the level of photo-reactive solvents manufacturers can use in coatings.