Basecrete CRK-1208 Crack Repair Kit (Slabstitch)
Basecrete CRK-1208 Crack Repair Kit
May 7, 2021
HydroSHIELD™ Standard White
July 7, 2021

DynaSHIELD® Aluminum Coating

ITEM:7892100

$221.00

DynaSHIELD® Aluminum Coating is a solvent type, asphalt-based coating that is similar to conventional roof coatings. Manufactured with special blend asphalts, refined oils, mineral stabilizers and reinforced with hi-tech asbestos-free fibers. Aluminum coatings provide a tough continuous coating with extra-long life and good initial brightness. Aluminum pigment gives it a bright, metallic aluminum color when applied on metal, tile, conventional bituminous roof surfaces and modified bitumen. This reflective coating reduces the deteriorating effect of the sun’s rays, reduces interior temperature, and protects roof surfaces from excessive weathering.

Before ordering any DynaShield products please check Volatile Organic Compound technical data below.

  Ask a Question
Store
SKU: 7892100 Categories: , ,

DynaSHIELD® Aluminum Coating is a solvent type, asphalt-based coating that is similar to conventional roof coatings. Manufactured with special blend asphalts, refined oils, mineral stabilizers and reinforced with hi-tech asbestos-free fibers. Aluminum coatings provide a tough continuous coating with extra-long life and good initial brightness. Aluminum pigment gives it a bright, metallic aluminum color when applied on metal, tile, conventional bituminous roof surfaces and modified bitumen. This reflective coating reduces the deteriorating effect of the sun’s rays, reduces interior temperature, and protects roof surfaces from excessive weathering.

RECOMMENDED USES
DynaSHIELD® Aluminum Coating can be used on old asphalt roofs, smooth or mineral surfaced, silos, metal roofs and siding, water towers, modified bitumen, mobile homes, campers, and RV’s. Aluminum coatings can reduce interior temperatures up to 15°F and serve as a rust inhibitor and anti-corrosive agent.

APPLICATION
Surfaces must be dry, and free of dirt, dust, and debris. Dried out roofs should be primed. Repair all cracks, breaks, or open seams. Do not apply when rain appears imminent or less than four hours before surface can be expected to be covered with dew. DynaSHIELD® Aluminum Coating is ready to use from the container. Moderate stirring is required to mix pigment. Stir after each application. Apply with roof brush, squeegee, or spray gun. When brushing, brush last strokes all in one direction.

RESTRICTIONS
Do not use on dead level asphalt, tar base, or gravel roofs. Concrete surfaces must be primed. Freshly coated hot bituminous roofs should be allowed to weather at least 3 months. Roofs patched or primed should weather at least 10 days. Modified bitumen roofs should weather 30-90 days before application.

RadonSeal Standard & RadonSeal Plus Concrete Sealers
REFLECTIVITY Initial: .67 ASTM C1549 Aged:
.56 ASTM D1918
EMISIVITY .42 ASTM C1371
SOLIDS Weight 58% +/- 2% ASTM D-1353
SOLIDS Volume 54% +/- 2% ASTM D-2697
WEIGHT 8.3 lbs. per gallon +/- 2%
VISCOSITY 4000 – 7000 Brookfield
FLASH POINT 103O F ASTM D-56
STORAGE 3 years unopened between 40° F – 100° F
DRY TIME 3 years unopened between 40° F – 100° F
FULL CURE 24 – 72 hours depending on humidity, air movement, and temperature
CLEAN-UP Biodegradable citrus cleaning products or ARC’s Cleaning Solvent for oil-based products
ADHESION Passed ASTM D-3359
PIGMENT Processed Meta
VOC <400 grams per liter

Avoid breathing fumes and prolonged contact with skin. Do not ingest. Keep containers covered when not in use. When using, provide proper ventilation. Dispose of product and container in accordance with local disposal codes.

CONSULT ARC TECHNICAL DEPARTMENT FOR ANSWERS TO ANY QUESTIONS REGARDING THE USE OF THIS PRODUCT

System warranty available. When sold separately from the system there is no warranty given, expressed or implied, through the values or statements made here, nor are there any assertions that the product purchased has been individually tested to conform to these standards. Testing is performed on a random basis by our in-house and independent third-party labs in order to obtain approval and/or classification. Acceptance, purchase and selection of these products are the sole responsibility of the buyer, buyer’s agent, or the buyer’s customer. ARC assumes no responsibility for coverage, performance, or injuries resulting from use. Liability, if any, is limited to the replacement of the product.

NO OTHER GUARANTY OR WARRANTY OF ANY KIND IS MADE BY ACE ROOF COATINGS, INC. OR ITS SUBSIDIARIES, EXPRESSED OR IMPLIED, STATUTORY, BY OPERATION OF LAW, OR OTHERWISE, INCLUDING COSMETIC APPEARANCE, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Weight 52 lbs
Dimensions 12 × 12 × 14 in

Volatile Organic Compound

What Are “VOC’s”?

As more states enact stricter air quality regulations, the term “VOC” is becoming a greater part of our everyday vocabulary. But what exactly is a “VOC”?

VOC is an acronym for Volatile Organic Compound. That’s a mouthful, but what does it mean? VOC’s are carbon based (organic) solvents that evaporate (volatilize) under normal atmospheric conditions and have the ability to photo-react when exposed to sunlight. This reaction creates low-level ozone, a major component of smog.

Smog is associated with causing asthma, bronchitis, and emphysema. Smog poses a health threat to the young, elderly, and those suffering from cardiovascular disease. And as anyone who has flown into some major metropolitan cities (like Los Angeles) can attest, smog is a real problem for everyday citizens. As a result, many states have enacted strict VOC regulations, limiting the level of photo-reactive solvents manufacturers can use in coatings.

Reviews

There are no reviews yet.

Be the first to review “DynaSHIELD® Aluminum Coating”

Your email address will not be published. Required fields are marked *

No more offers for this product!

General Inquiries

There are no inquiries yet.