DynaSHIELD® FLASHING GRADE

$274.00

DESCRIPTION

DynaSHIELD® Flashing Grade is a proprietary blend of polymers. It is an elastomeric cement that bonds to metal, wood and other construction products. It is useful for both horizontal and vertical surfaces, and it is an excellent sealant on transitional joints. This product will bridge gaps up to 1/2” in width

Before ordering any DynaShield products please check Volatile Organic Compound technical data below.

SKU: 7892000 Categories: , ,

Description

DESCRIPTION
DynaSHIELD® Flashing Grade is a proprietary blend of polymers. It is an elastomeric cement that bonds to metal, wood and other construction products. It is useful for both horizontal and vertical surfaces, and it is an excellent sealant on transitional joints. This product will bridge gaps up to 1/2” in width

RECOMMENDED USES
DynaSHIELD® Flashing Grade may be applied to metal, stainless steel, thermoplastic roofing materials, and masonry products. It bonds to wood, steel, fiberglass, aluminum and most plastics. It may also be used with reinforcement textiles, fiberglass, and polyester.

APPLICATION
Apply evenly at a surface temperature of 35° F or greater. Apply on a clean, dry surface. Do NOT apply over moisture in or on roof deck. Use protective hand gloves and trowel or stiff brush when applying. Warm product to 100 ° F for application.

BENEFITS
Easy to Apply
Long Shelf Life
Year Round Usage
Fast-Curing
Can Be Tinted
Cleans Easily
Freeze Resistant
Stain Resistant
Single Component

TECHNICAL DATA
TENSILE 1500 psi ASTM D-2370
ELONGATION 400% ASTM D-2370
COLOR White
PERMEABILITY Non-breathing ASTM E-1653
SOLIDS Weight 58% +/- 2% ASTM D-1353
SOLIDS Volume 46% +/- 2% ASTM D-2697
WEIGHT 9.32 lbs. per gallon +/- 2%
VISCOSITY Trowel Grade 150,000 – 250,000 cps.
ABRASION Passed ASTM D-986
HARDNESS 68 Shore A ASTM D-2240
STORAGE 3 years unopened at 40° F – 100° F
DRY TIME 1 hr. at 75° F and a thickness of 16 wet mils
FULL CURE 24 – 72 hours depending on humidity,

air movement, and  temperature

CLEAN-UP Biodegradable citrus cleaning products or ARC’s Cleaning Solvent for oil-based products
ADHESION Passed ASTM D-3359
Passed ASTM D-3359 Titanium
VOC <466 grams per liter

Avoid breathing fumes and prolonged contact with skin. Do not ingest. Keep containers covered when not in use. When using, provide proper ventilation. Dispose of product and container in accordance with local disposal codes.

CONSULT ARC TECHNICAL DEPARTMENT FOR ANSWERS TO ANY QUESTIONS REGARDING THE USE OF THIS PRODUCT

System warranty available. When sold separately from the system there is no warranty given, expressed or implied, through the values or statements made here, nor are there any assertions that the product purchased has been individually tested to conform to these standards. Testing is performed on a random basis by our in-house and independent third-party labs in order to obtain approval and/or classification. Acceptance, purchase and selection of these products are the sole responsibility of the buyer, buyer’s agent, or the buyer’s customer. ARC assumes no responsibility for coverage, performance, or injuries resulting from use. Liability, if any, is limited to the replacement of the product.

NO OTHER GUARANTY OR WARRANTY OF ANY KIND IS MADE BY ACE ROOF COATINGS, INC. OR ITS SUBSIDIARIES, EXPRESSED OR IMPLIED, STATUTORY, BY OPERATION OF LAW, OR OTHERWISE, INCLUDING COSMETIC APPEARANCE, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Additional information

Weight 52 lbs
Dimensions 12 × 12 × 10 in

Reviews

There are no reviews yet.

Be the first to review “DynaSHIELD® FLASHING GRADE”

Your email address will not be published. Required fields are marked *