Pigments for Concrete | Dye Over Blender WB®
Avaliable Colors
PRODUCT DESCRIPTION
BLENDER DYE OVER® is made with very fine molecules of color designed to penetrate and coloring any cement-based surface.
BLENDER DYE OVER® is ideal for use with the polishing and shinning floor system, but can also be used as a base color in the concrete where a concrete oxidation system will be applied as retouching or as an individual coloring agent only.
USES :
BLENDER DYE OVER® is available in 8 stock colors. They can be combined to create a number of new shades. When properly applied, BLENDER DYE OVER® gives a spectacular aspect to polished concrete floors.
$64.22
– A varied range of colors
– Easy to apply
– Practical powder presentation for easy shipping and storage
– Perfect for use in floors with polishing and shinning system
– They can be used as a base or retouch in combination with oxidation systems for concrete
EXCELLENT FOR INTERIOR APPLICATION
PRESENTATION AND PERFORMANCE
BLENDER DYE OVER® is packed in plastic bottles for dilutions in 1 gallon (3,8 Lt) and 5 gallons (19 Lt).
The application ranges for already diluted BLENDER DYE OVER® can vary from floor to floor, depending on several factors such as: roughness, texture, porosity, age of concrete, among others.
BLENDER DYE OVER® for 1 gallon dilution (3,8 Lt) yield from 400ft2 – 600ft2 (37m2 – 55 m2).
Before starting to install the diluted BLENDER DYE OVER®, you must shake the container again to ensure that the concentrate is properly mixed.
Application:
1. Apply the diluted BLENDER DYE OVER® with a sprinkler fine nozzle. It can also be applied with white tow of industrial use.
2. The diluted BLENDER DYE OVER® will dry in a matter of minutes, then remove with a soft dry cloth the excess of residues that dye left on drying and ambient dust.
3. If you are using the BLENDER DYE OVER® in a polishing and shinning system, proceed to the last polishing step of the system.
BLENDER DYE OVER® is translucent, imperfections on the surface can be accentuated.
Sealant :
In polishing and shinning systems, once the BLENDER DYE OVER® has dried, it is recommended to apply 2 layers of FGS Hardener Plus or Lion Hard (allow the first layer to dry before applying the second layer) to give brightness to the color and delay color loss over time.
When BLENDER DYE OVER® is not applied in polishing and shinning systems it is necessary to apply some sealer to delay the loss of color over time. It is suggested to use products of the L & M line as Permaguard SPS or the Blender line as BLENDER BICOMPONENT POLYURETHANE®, BLENDER SEAL ACRYL® 30% o BLENDER SEAL ACRYL® WB.
Do not use the BLENDER DYE OVER® as a final touch in the polishing and shinning concrete process, in any case it can be applied at any step of the polishing and shinning system starting from stone 400 onwards and depending on which step was selected in the process of the system. Preferably it is recommended to apply in the previous step to the last selected, commonly are chosen among the following steps for the final touch: 800, 1500 and 3000.
The use of a sprinkler with fine nozzle in the BLENDER DYE OVER® can ensure uniformity and effectiveness in the application. Spray a layer evenly without creating puddles or over spraying to prevent overspend product or to have a discoloration.
For additional protection against oil and other liquid stains, it is recommended to apply the Petrotex oil and water repellent after finishing the application of the FGS Hardener Plus sealer for the case of polished and polished concrete.
BLENDER DYE OVER® is a premixed powder that is not hazardous. Always wear suitable clothing, lenses, face shield and protective gloves. Please refer to the MSDS before using.
Important: When shaking the powder or mixed with acetone, the product is extremely flammable, so it must ventilate the area and keep away any source of heat, spark, flame or ignition.
STORAGE
BLENDER DYE OVER® should be kept in a dry place. Lifetime of the product is one year when kept in proper condition.
This product, its materials and its manufacture are warranted to be free from defects under the quality control standards in accordance with Blender Group®, S.A. de C.V.
All recommendations, statements and technical data attached are based on evidence that we believe to be reliable and correct, but the accuracy of such evidences are not guaranteed and does not provide any guarantee, expressed or implied, including warranty of appropriate use or market respect to its products. Satisfactory results depend on many factors that go beyond Blender Group® control.
The user must rely on his own information and tests to determine the suitability of the use of the product, and user assumes all risk, loss, damage, expense and liability resulting from his direct or indirect use, or the consequences of product use. Blender Group® shall not be liable for injury, loss or damage to purchasers or third parties injured by direct or indirect use resulting from the use or inability to use the product.
The sole responsibility of Blender Group® is to replace that portion of the product that proves to be defective. Any claim for warranty must be made within six (6) months from the date of the claim. This limited warranty applies only if the product was properly installed and used in accordance with the instructions and stored properly prior to use.