Call Us
1 800 631 1720
Email Us
info@torchenterprises.net

DynaSHIELD® FLASHING GRADE

DESCRIPTION

DynaSHIELD® Flashing Grade is a proprietary blend of polymers. It is an elastomeric cement that bonds to metal, wood and other construction products. It is useful for both horizontal and vertical surfaces, and it is an excellent sealant on transitional joints. This product will bridge gaps up to 1/2” in width

RECOMMENDED USES

DynaSHIELD® Flashing Grade may be applied to metal, stainless steel, thermoplastic roofing materials, and masonry products. It bonds to wood, steel, fiberglass, aluminum and most plastics. It may also be used with reinforcement textiles, fiberglass, and polyester.

APPLICATION

Apply evenly at a surface temperature of 35° F or greater. Apply on a clean, dry surface. Do NOT apply over moisture in or on the roof deck. Use protective hand gloves and a trowel or stiff brush when applying. Warm product to 100 ° F for application.

BENEFITS

  • Easy to Apply
  • Long Shelf Life
  • Year Round Usage
  • Fast-Curing
  • Can Be Tinted
  • Cleans Easily
  • Freeze Resistant
  • Stain Resistant
  • Single Component

TECHNICAL DATA

Technical Data 

TENSILE

1500 psi ASTM D-2370

ELONGATION

400% ASTM D-2370

COLOR

White

PERMEABILITY

Non-breathing ASTM E-1653

SOLIDS

Weight 58% +/- 2% ASTM D-1353

SOLIDS

Volume 46% +/- 2% ASTM D-2697

WEIGHT

9.32 lbs. per gallon +/- 2%

VISCOSITY

Trowel Grade 150,000 – 250,000 cps.

ABRASION

Passed ASTM D-986

HARDNESS

68 Shore A ASTM D-2240

STORAGE

3 years unopened at 40° F – 100° F

DRY TIME

1 hr. at 75° F and a thickness of 16 wet mils

FULL CURE

24 – 72 hours depending on humidity,

air movement, and  temperature

CLEAN-UP

Biodegradable citrus cleaning products or ARC’s Cleaning Solvent for oil-based products

ADHESION

Passed ASTM D-3359

Passed ASTM D-3359

Titanium

VOC

<466 grams per liter

Avoid breathing fumes and prolonged contact with skin. Do not ingest. Keep
containers covered when not in use. When using, provide proper ventilation. Dispose of product and container in accordance with local disposal codes.

CONSULT ARC TECHNICAL DEPARTMENT
FOR ANSWERS TO ANY QUESTIONS
REGARDING THE USE OF THIS PRODUCT

System warranty available. When sold separately from the system there is no warranty given, expressed or implied, through the values or statements made here, nor are there any assertions that the product purchased has been individually tested to conform to these standards. Testing is performed on a random basis by our in-house and independent third-party labs in order to obtain approval and/or classification. Acceptance, purchase and selection of these products are the sole responsibility of the buyer, buyer’s agent, or the buyer’s customer. ARC assumes no responsibility for coverage, performance, or injuries resulting from use. Liability, if any, is limited to the replacement of the product. NO OTHER
GUARANTY OR WARRANTY OF ANY KIND IS MADE BY ACE ROOF COATINGS, INC. OR ITS SUBSIDIARIES, EXPRESSED OR IMPLIED, STATUTORY, BY OPERATION OF LAW, OR OTHERWISE, INCLUDING
COSMETIC APPEARANCE, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.